Shop Rollforming
Up to 40' for shipping
SS150 panels can be produced at our Shawnee facility for customer pickup or delivery. When panels are being shipped, lengths up to 40 feet are available.
← Roof Panels
Mechanically Seamed Standing Seam
SS150
A concealed-clip mechanically seamed standing seam roof panel available in multiple widths, materials and panel-face configurations.
Seam Height
1 1/2"
Panel Widths
12", 16", 18", 20"
Seam Type
Mechanical
Attachment
Concealed Clip
SS150 Profile
Mechanically seamed for a secure standing seam system.
The SS150 is a mechanically seamed standing seam roof panel with a 1 1/2-inch seam. Adjacent panels overlap at the seam and are mechanically seamed together after installation.
Concealed clips secure the panels to the roof substrate while keeping the attachment system hidden beneath the finished roof. KAM can produce the SS150 in multiple widths and panel-face configurations.
Profile Dimensions
SS150 panel geometry.
Reference dimensions for the SS150 mechanically seamed standing seam profile. Contact KAM with questions regarding panel sizing, material selection or project-specific requirements.
Dimensions shown are for profile reference. Contact Kansas Architectural Metals to confirm project-specific panel requirements before ordering.
Available Panel Widths
Four KAM coverage widths.
12"
16"
18"
20"
Material Options
Available materials.
24 ga Steel
22 ga Steel
.032 Aluminum
.040 Aluminum
Panel Face Options
Configure the panel face.
Smooth / Flat
Striations
Beads
Ribs / Pencil Ribs
Clip Relief
Production Options
Rollformed for the way your project needs to be built.
On-Site Rollforming
Continuous project lengths
For longer roof runs, KAM can bring the rollforming equipment directly to the project and produce continuous panels at the jobsite. Travel and per-diem charges apply.
Your Material
Customer-supplied coil welcome
Already have project coil? KAM can rollform customer-supplied material at a reduced fabrication rate. Customer-supplied sheet can also be used for matching trim.
Complete Roof Package
Panels and matching trim from one fabricator.
KAM can fabricate matching roof trim and architectural sheet metal at our Wichita and Shawnee locations, including ridge caps, rake and eave trim, flashing, cleats, coping and project-specific components.
Submit Your Drawings →Colors & Finishes
Choose the finish for your project.
Review available architectural metal colors and finishes from PAC-CLAD and Drexel Metals. Contact KAM to confirm material availability or request a physical color sample.
Color and material availability may vary. Contact KAM to confirm availability or request a physical color sample.
Questions?
Talk to us about your project.
Panel requirements can vary by project. Contact KAM to discuss profile options, materials, lengths, accessories or other project-specific requirements.
913-441-1208SS150
Ready to get your panels rolling?
Send us the panel widths, lengths, quantities, material, color and face options required for your project.