Shop Rollforming
Up to 40' for shipping
SS675 panels can be produced at our Shawnee facility for customer pickup or delivery. When panels are being shipped, lengths up to 40 feet are available.
← Roof Panels
Snap-Lock Standing Seam
SS675
A concealed-clip snap-lock standing seam roof panel available in multiple widths, materials and panel-face configurations.
Seam Height
1 5/8"
Panel Widths
12", 14", 16", 18"
Seam Type
Snap-Lock
Attachment
Concealed Clip
SS675 Profile
Snap-lock performance with a clean finished appearance.
The SS675 is a standing seam roof panel with a 1 5/8-inch seam. Concealed clips secure the panel to the roof substrate while the adjacent panel snaps into place over the seam, leaving the attachment system hidden beneath the finished roof.
KAM can produce the SS675 in several panel widths and face configurations to meet the requirements and appearance of the project.
Profile Dimensions
SS675 panel geometry.
Reference dimensions for the SS675 snap-lock standing seam profile. Contact KAM with questions regarding panel sizing, material selection or project-specific requirements.
Dimensions shown are for profile reference. Contact Kansas Architectural Metals to confirm project-specific panel requirements before ordering.
Available Panel Widths
Four KAM coverage widths.
12"
14"
16"
18"
Material Options
Available materials.
24 ga Steel
22 ga Steel
.032 Aluminum
.040 Aluminum
Panel Face Options
Configure the panel face.
Smooth / Flat
Striations
Beads
Ribs / Pencil Ribs
Clip Relief
Production Options
Rollformed for the way your project needs to be built.
On-Site Rollforming
Continuous project lengths
For longer roof runs, KAM can bring the rollforming equipment directly to the project and produce continuous panels at the jobsite. Travel and per-diem charges apply.
Your Material
Customer-supplied coil welcome
Already have project coil? KAM can rollform customer-supplied material at a reduced fabrication rate. Customer-supplied sheet can also be used for matching trim.
Complete Roof Package
Panels and matching trim from one fabricator.
KAM can fabricate matching roof trim and architectural sheet metal at our Wichita and Shawnee locations, including ridge caps, rake and eave trim, flashing, cleats, coping and project-specific components.
Submit Your Drawings →Colors & Finishes
Choose the finish for your project.
Review available architectural metal colors and finishes from PAC-CLAD and Drexel Metals. Contact KAM to confirm material availability or request a physical color sample.
Color and material availability may vary. Contact KAM to confirm availability or request a physical color sample.
Questions?
Talk to us about your project.
Panel requirements can vary by project. Contact KAM to discuss profile options, materials, lengths, accessories or other project-specific requirements.
913-441-1208SS675
Ready to get your panels rolling?
Send us the panel widths, lengths, quantities, material, color and face options required for your project.